Featured
Pothole Guard Scissor Lift
Pothole Guard Scissor Lift. The pothole guards are sticking upon retraction. 1, which lifting section 18 is supported on the vehicle frame 12.

1, which lifting section 18 is supported on the vehicle frame 12. Electric scissor lift compact 2632 e; The pothole guards are sticking upon retraction.
Small Electric Lightweight Scissor Lift Automatic Pothole Guard System(Id:10904884).
The pothole guards are sticking upon retraction. The pothole guards deploy completely. 3 platform extension release pedal.
Driveable At Full Height Up To:.
One of the pothole guard switches was indexed improperly. Again the lift is in the down position and the. Sjiii pothole protection limit switch adjustment.
Sensor On Pothole Protection Plate Will Make Platform Fall Down To Reduce The Ground Clearance Of Electric Scissor Lift To Prevent Further Movement Of Lift.
Thank the good lord, that alarm is annoying as hell. Ohm meter is showing voltage going through both wires, and they look like their in good working order. Electric scissor lift compact 2632 e;
Some Components/Details May Have Been Altered Or Removed For Clarity.
103.1 pothole protection assembly item part no. Another cause of this malfunction is a damaged wire connection. The vehicle platform 16 is raised and lowered by a lifting section 18, shown as a scissor lift in fig.
Shop Our Extensive Online Aerial Lift Equipment Store.
The bulk of the slab scissor market demand is for units with platform heights of 19’, 20’, 26’, 32’ and 40’. It can appear if the pothole guard is blocked or the pothole limit switches are not activating. They either will not retract at all or the platform stops then drops suddenly the last few inches causing the pothole guards to retract quickly.
Comments
Post a Comment